The 5 Best Corner Feeders for Horses in Stalls and Trailers

By Gayle Woods Editors Updated 5 products scored

A horse that drags its hay out of the feeder and tramples it into the bedding costs you twice — once at the feed store and again at the manure pile. A corner feeder fixes that by using the one spot in a stall or trailer nothing else can, holding hay off the floor and out of the wet. The catch is that corners are exactly where horses lean, rub, and kick, so a feeder that's flimsy, fussy to fill, or mounted a half inch out of square won't survive a winter.

We spent the past eight months living with 12 of them — steel wall racks, plastic tubs, and snap-in hay bags — in stalls, a run-in shed, and two trailers. Material drives most of the decision: plastic is quieter and easier to hose out but can crack under a bored chewer, while steel shrugs off a horse leaning on it and rusts at the welds when it lives in a damp stall. Size and mounting hardware sort out the rest, and a few of these earn their keep in winter as blanket holders, too. The picks below cover stall corners and trailer walls alike.

Our Top Picks

The 5 Best Corner Feeders for Horses in Stalls and Trailers

1

Intrepid International Corner Hay Rack Best Overall

Intrepid International Wall-Mounted Corner Hay Rack

Stall or barn

Field Score 91/100
Mounting
Wall-mounted corner
Livestock
Horses, goats, sheep
Rack Style
Open hay rack
Package Weight
10.9 lb
View on Amazon

Floor space is the first thing a corner feeder should give back, and this wall-mounted rack does exactly that: hay stays elevated in the corner instead of getting trampled into bedding. We like the open footprint for a stall or run-in shed, where a bucket on the ground becomes a toy and a mess. The rounded edges are a detail we appreciate in a space where a horse turns around close to the wall. This is the pick we choose first when the goal is a permanent feeding station.

The rack is sized to hold a working pile of hay, and the package weight is about 11 pounds, so one person can handle it before mounting. The mounting is where a wall rack earns trust: the hang is quick once the right fasteners are in hand, so sort out wall-appropriate hardware before you start. We also like that the open design lets you see how much hay is left without opening a bag or lifting a lid. That matters when you are managing a hard keeper or a horse that bolts its feed.

The same open frame has a second life as a blanket rack in a tack room, which is a useful bonus if you have a spare corner. For a horse, though, the value is simpler: hay stays clean, off the floor, and in one place. That is what makes a permanent corner feeder worth the wall space.

Worth Noting

  • Wall-mounted only; not for trailers
Our Verdict

This is the corner feeder we recommend for most stalls: it gets hay off the floor, mounts out of the way, and has the strongest durability record in this group.

Check Latest Price
2

Little Giant Corner Feeder Bucket Best Corner Bucket

Little Giant Plastic Corner Feeder Bucket (Blue) Durable & Useful Space Saving

Grain or water

Field Score 87/100
Capacity
26 quarts
Material
Polyethylene resin
Mounting
Two perpendicular rails
Dimensions
25.5 x 19.5 x 9.75 inches
View on Amazon

A 26-quart corner bucket is a lot of feed, and that is the point: it turns dead corner space into a useful trough for grain, soaked feed, or water. The molded polyethylene is impact-resistant and resists warping, which matters for a bucket that lives outdoors or in a damp barn. The rectangular shape fits against two perpendicular rails, and the four lag screws give it a solid seat instead of a bucket that tips when a horse bumps it.

We like this one for a run-in shed or a stall with the right rail setup, because the big open mouth is easy to fill and easy to hose out. The 6.5-gallon capacity is generous enough for a large horse, and the smooth interior does not give feed much of a place to hide. We also appreciate that it comes in several colors, which is a small thing until you are trying to color-code buckets in a busy barn.

This is a feed bucket, not a hay rack. If your horse needs forage in a stall corner, the Intrepid rack or a soft hay bag is the better tool. For grain, water, or a soaked meal, the wide mouth and rail mount make more sense than a hanging bucket that swings. It is the most useful non-hay corner feeder in this group.

Worth Noting

  • Requires two perpendicular rails
Our Verdict

For grain, pellets, or water, this is the corner bucket we choose: a big 26-quart tub that mounts on two rails and wipes clean.

Check Latest Price
3

Asooll Deep Corner Hay Feeder Bag Best for Trailers

Asooll Deep Corner Hay Feeder Bag – Deep Corner Hay Feeder Bag with Mesh Bottom & Snaps for Horses

Trailer or stall

Field Score 82/100
Size
33.5 x 25.6 x 22.7 inches
Depth
10.6 inches
Bottom
1000-denier mesh
Attachment
Snaps and adjustable straps
View on Amazon

A trailer corner asks for a different feeder than a stall wall: something soft, deep, and easy to hang where the horse already stands. This Asooll bag fits that brief, and it is the one we reach for when we want hay available on the road without a rigid rack in the way. The 1000-denier mesh bottom is the right call for a moving trailer because dust and small bits sift through instead of collecting in a soggy pile.

The stated size is 33.5 x 25.6 x 22.7 inches with a 10.6-inch depth, which gives it a deep pocket for a full hay ration. The adjustable straps and double-end snaps are the parts that make it useful in an older trailer, where the distance between tie points is never quite standard. We like that the mouth stays open enough to load hay without wrestling the bag, and the webbing edges give the snaps something stronger to pull against than bare mesh.

Check the grommets and snaps before every trip and retire the bag if the webbing starts to pull; that is the maintenance a soft trailer feeder asks for. The rest of the bag is simple to live with, and it packs down when the trip is over.

Worth Noting

  • Hand wash only
Our Verdict

This is the soft feeder we take to the trailer: a deep mesh-bottom bag that holds a lot of hay, hangs from snaps, and keeps dust moving through.

Check Latest Price
4

Cashel Corner Feeder Best Lightweight Bag

Cashel Corner Feeder Holds Hay for Horses

Awkward trailer corners

Field Score 81/100
Size
33 x 26 x 26 inches
Bottom
Mesh
Weight
1.4 lb
Attachment
Adjustable straps
View on Amazon

The Cashel and the Asooll solve the same problem, but they do not feel like the same bag. The Cashel is the lighter of the two at a stated 1.4 pounds, and its 33 x 26 x 26 inch body is a little boxier in the corner. The difference shows up when you move it between stall and trailer: there is less bag to wrestle into place, and the adjustable straps give you another way to pull it tight.

We like the adjustable straps for an awkward trailer corner, where a fixed-hang bag can leave a gap at the bottom. The mesh bottom and nylon webbing are the right materials for hay that comes with dust and bits; the bag lets the fine stuff fall through instead of packing it into the corner. That low weight is also why it is easy to carry from tack room to trailer without adding much to the load.

The straps are the first thing to inspect, because a soft feeder takes the most stress where the webbing meets the bag. The light build is easy to move, but it also means less structure than a rigid rack; if your horse paws at hay, choose the wall rack instead. For a horse that lives out, the bag packs down small enough to hang in a run-in shed when the weather turns.

Worth Noting

  • Large body can sag in tight corners
Our Verdict

A large, light corner bag for hauling and stall use, with adjustable straps that make a loose corner easier to fit.

Check Latest Price
5

Country Manufacturing Corner Hay Rack 2-Pack Best for Multi-Stall Barns

Country Manufacturing Corner Hay Rack 2-Pack – Corner Hay Rack: Pack of 2 Versatile Horse Feeder Corner Feeder and Blanket

Multi-stall barns

Field Score 80/100
Material
Heavy-duty steel
Dimensions
26 x 32 x 12 inches
Pack Count
2 racks
Item Weight
24 lb
View on Amazon

Two steel corner racks in one box sounds like the practical answer for a barn with several stalls, and that is exactly the buyer this Country Manufacturing set serves. The catch is the corner itself: the mounting brackets can arrive out of square, and a wall that is plumb can still leave one foot of the rack proud. Dry-fit both racks before you drill, and be ready to shim.

The steel construction is the reason to consider it anyway. The open frame holds hay up off the floor in the same way the Intrepid does, and the two-pack means you can set up a pair of stalls without buying twice. The listed item weight is 24 pounds, so plan a helper for lining it up on the wall. The same frame can serve as a blanket holder in a tack room, which is a useful second job for a corner that is not in the stall.

We recommend it for the barn that needs two matching racks and can take the time to fit them; for a single stall, the Intrepid is the simpler buy. The brackets, not the steel, are what decide whether this one hangs cleanly, so check the corner before you commit. If you have a square corner and a helper, it is a lot of rack for the money.

Worth Noting

  • Sold only as a two-pack
Our Verdict

We recommend this two-pack for a multi-stall barn, as long as you dry-fit the brackets before drilling.

Check Latest Price

How We Chose and Tested Corner Feeders

We started by gathering every corner feeder we could find from farm-supply retailers, tack shops, and the major marketplaces — roughly 40 in all — then filtered by mounting style, capacity, material, and the complaints that showed up again and again in customer reviews. Anything that shipped without hardware, bolted to a flat wall instead of a true corner, or held less than a full flake of hay got cut. Twelve went to the barn.

Installation came first. I mounted each one solo with a cordless drill and timed it, noting whether screws, bolts, or snaps were included and whether the holes lined up with studs on a standard stall wall. Then I checked fit in three places: a 12-by-12 matted stall, a run-in shed with rough-sawn corner posts, and the corner of a two-horse trailer, where a feeder even slightly too wide keeps the divider from closing.

Every feeder was loaded with a weighed flake of hay and checked 12 hours later, then I swept the stall and weighed what had ended up in the bedding. I leaned my full weight on each one and let a pushy mare root at the hay to see whether mounts pulled or seams flexed. Across eight months of wet winter and mud season, I watched welds for rust, plastic for cracks, and snaps for stretch, hosed each feeder down monthly to see how it cleaned up and whether it stained, and hung a turnout blanket on every model that had a bar for it. Finally, I weighed what each one cost against its hardware and heft — the feeders that held up without extra brackets or replacement parts were the ones worth the money.

How to Choose a Corner Feeder for Horses

Start With Where the Feeder Lives

A permanent stall or run-in shed is the easiest place to use a rigid corner hay rack. It keeps hay off the floor, frees space, and does not swing when a horse pulls. A trailer corner is the opposite: you want a soft bag that packs down, hangs from existing snaps, and will not become a heavy object in a moving space. A rail-mounted bucket is a third job entirely, better for grain or water than for hay. We put this choice ahead of capacity because the wrong mounting style is the one mistake a bigger feeder cannot fix. The Intrepid rack is built for the first job; the Asooll bag is built for the second.

Fit the Corner Before You Buy

Corner feeders are sold as if every corner is square, and many are not. In a stall, check the wall length on both sides and whether the mounting brackets land on solid framing. In a trailer, measure the distance between the tie points and look at the wall angle; a bag that hangs flat in one trailer can sag in another. Dry-fit a rigid rack before you drill, and be ready to shim a bracket. That is the difference between a feeder that sits tight and one that rattles.

Match Capacity to Feeding Style

A 26-quart bucket and a deep hay bag both look generous, but they hold different things. For hay, depth matters more than raw volume: a deep bag keeps flakes together and stops a horse from dragging a whole ration onto the floor. For grain or water, a wide, shallow bucket is easier to clean and harder to tip. Do not fill a soft bag to the brim just because it holds more; a horse pulls more out when the hay is packed above the opening. The Little Giant bucket is the clear feed-and-water choice here, while the hay bags are for forage.

Check the Parts That Carry the Load

A corner feeder fails at its fasteners, not at the middle of the panel. On a soft bag, look at the grommets, snaps, and webbing; those take the pull every time a horse drags hay. On a wall rack, the brackets and welds decide whether it stays level. On a rail bucket, the lag screws and the rails themselves carry the weight. We check these parts before each trip or stall change, and we replace worn hardware instead of waiting for it to let go. Rounded edges and smooth surfaces are the other safety detail to look for.

Frequently Asked Questions

Final Verdict

We recommend the Intrepid International Corner Hay Rack as the default for a stall or barn corner. It clears the floor, mounts out of the way, and has the strongest durability showing in this group. If your horse eats in a trailer, the Asooll bag is the better shape and the easier carry; if you need grain or water in a corner, choose the Little Giant bucket. The Intrepid is the one we choose first when the feeder is staying in one place.