The 7 Best Crossbow Broadheads of 2026

The Swhacker #207 opens in two stages: wing blades engage first and shield the primary blades until the head is inside. That is the most interesting design in this price range, and it gives you a full 2-inch cut with a compact profile in flight. For the money, it is the mechanical we recommend first.

We appreciate the 100-grain weight and the fact that Swhacker sells this one for both compound bows and crossbows. It flies like a field point, which makes the transition from practice to hunting less eventful, and the two-stage action means the main blades are not hanging out in the wind. The aluminum ferrule and stainless blades are a sensible combination for a hunting head, and replacement blades are sold separately so you can keep the ferrule working. A 2-inch cut is a lot of margin on a deer, and the head does not ask you to change your bolt setup.

The two-slice system does leave more small parts to check before the shot, so we treat it as a hunting head and keep a spare pack for practice. It earns Best Value because it delivers the widest cut in this group at the lowest mechanical price. If you want a tougher head for repeated target work, the fixed-blade G5 is the better tool.

Nothing has to open on the Muzzy Trocar Crossbow. That is the appeal: a 125-grain fixed blade that goes from quiver to rail without a collar, O-ring, or deployment step. For a hunter who has had a mechanical fail, the simplicity is worth more than a giant cut. The compact fixed profile also keeps the front of the bolt clean in flight.

The 125-grain weight is the useful part for crossbow hunters who like a heavier front end. It is still a fixed blade, so it will not give you the 2-inch wound channel of the RAGE or Swhacker, and a crossbow that is not tuned for fixed blades can show it at distance. We prefer it as the fixed-blade counterpoint in this set rather than as a universal recommendation. If your setup already shoots fixed heads well, this is the least dramatic way to hunt.

The trade is a narrower cut and a need to confirm point of impact, but it buys you a head with no moving parts. If your crossbow likes a 125-grain fixed blade, this is the one we choose. It is the least fussy head in this group, and the one we hand to a hunter who is tired of buying replacement blades.

The G5 Montec is a one-piece fixed blade, which means there is no ferrule-to-blade seam and nothing to replace after a pass-through. It is the head we reach for when we want to sharpen and hunt again rather than toss a bent mechanical in the trash. The 100-grain version here is spin-tested, and the Montec is also offered in 85- and 125-grain weights if your setup calls for something else.

The cut is 1 to 1 1/8 inches, which is narrower than the 2-inch mechanicals in this group. We accept that because the Montec is built for penetration and repeat use, and the all-steel construction gives it a solid, no-nonsense feel. A fixed blade also demands a tuned crossbow; if your bolt is not flying clean, this head will tell you. That is not a defect, just a different kind of accountability.

What sold us is how little there is to go wrong. No collar, no blades to deploy, no plastic retention piece to lose in the leaves. The pink color is a small bonus, easy to spot if you drop one in dry grass, which is a small thing until you are on your hands and knees. For the crossbow hunter who sharpens and reuses gear, this is the fixed blade we point to.

Grim Reaper builds the X-Bow around high-speed crossbows. The 100-grain, three-blade head uses a 1 1/2-inch cut and a retention system designed to keep the blades closed until impact. That is the right priority for a fast setup, where a mechanical that leaks open in flight can ruin a shot before the animal is ever in range.

We were impressed by the three-blade layout because it gives you more cutting surface than a two-blade head of the same width, and the Razortip is built to start the hole. The 1.5-inch cut is smaller than the 2-inch RAGE and Swhacker, but it is still a generous mechanical wound channel. This is the premium mechanical in this group, and the tight blade retention is what you are paying for.

The head is not cheap, and it is not the widest. What it does well is behave on a fast crossbow, which matters more than another half inch of cut if the blades open early. For a hunter with a high-speed setup who wants a three-blade mechanical, this is the one we choose. If you are hunting on a tighter budget, the Swhacker gives you more cut for less.

The NAP Spitfire is a front-deploy mechanical, which means the blades start at the tip and open forward as the head enters. That is a different feel from a rear-deploying head: you get cutting action right at the entrance instead of waiting for the blades to be pulled back. The 1.5-inch three-blade cut is a useful middle ground.

We recommend this one for hunters who want a mechanical without paying premium money. The 100-grain weight is easy to match, and the three-pack keeps the cost per hunt reasonable. It flies like a field point, which is the minimum a crossbow hunter should demand, and the front-deploy action is intuitive to explain. For a first mechanical, that simplicity has real value.

The cut is 1.5 inches, not the 2-inch hole the RAGE and Swhacker open. That is a fair trade for a front-deploy head with a lower price, and it still gives you more margin than a 1-inch fixed blade. It is not the head we choose for the widest blood trail in this group, and the blades are not as stout as the fixed options.

For a hunter who wants front-deploy cutting without premium money, the Spitfire is a sensible pick. It flies like a field point, it is easy to match to a 100-grain bolt, and it opens at the tip. That is a fair trade for a budget-minded mechanical.

The Muzzy Trocar HBX is a hybrid: two fixed blades and two mechanical blades on a 100-grain head. The fixed blades are offset to induce spin, so you get some cutting even if the mechanical side has a bad day. That is the idea, and it is a useful one for a hunter who wants insurance without going all the way to a pure fixed blade.

We were struck by the 1-inch fixed cut plus the 1 5/8-inch mechanical opening. It gives you a wider total wound channel than a standard fixed head while keeping a fixed-blade anchor. The chisel tip and stainless ferrule are the right materials for a crossbow head, and the three-pack is set up for a season of hunting rather than a single shot.

The catch is deployment at the top end of crossbow speed. The mechanical blades can fail to open in time on very fast setups, and that is enough to keep it out of the top tier for us. It makes more sense on a moderate-speed crossbow where the fixed blades can do their job and the mechanicals can add cut. If your setup is near the top of the speed range, choose a fixed head or a mechanical with a stronger retention system.