The 6 Best Deer Feeder Timers of 2026

When the timer on an otherwise healthy feeder quits, the last thing you want is to rebuild the whole control box. This Wildgame unit is aimed at that exact job: a replacement timer that works with a compatible 6V or 12V control unit and gets the feeder running again without a lot of fuss. It's one of the lower-cost timers here, which matters when you're replacing a part you didn't plan to buy.

It programs up to six feed times a day and runs each event from 1 to 30 seconds. The large LCD and straightforward buttons are the right call for a feeder timer; we like that you can read the screen and step through the schedule without holding a manual. The in-line fuse is another detail we appreciate, because it gives the electronics a fighting chance against a wiring fault.

The fit is the first thing to check. This is a replacement timer, not a universal drop-in, and some control boxes leave too little room around the terminals. Measure the opening and compare the terminal layout before you order. If it fits, the timer does the job; if you want the longest service life, the top pick is the safer spend.

A timer alone doesn't help if the motor or spinner plate is also shot. The Wildgame Trophy Hunter kit is for the feeder that needs the whole control unit replaced, not just the brain. It includes the digital timer, high-torque motor, spinner plate, and a weather-resistant galvanized steel case, so you can rebuild the business end of a worn feeder in one order. We like that it solves the whole job in one box.

The timer programs six feed times a day with 1-30 second durations, and the motor has low, medium, and high speed settings. The sliding door and pressure-activated latch are practical touches; we appreciate being able to open the case without fighting a brittle plastic tab. The large LCD and silicone rubber buttons also make programming easier in cold weather.

The catch is durability. The kit has a mixed long-term record, and that is the difference between a good value and a false economy on a feeder you can't check often. If you need the complete assembly and can live with the risk, it earns its place; if you want the best odds of long service, the top pick is the safer buy.

The appeal of a Bluetooth feeder timer is obvious when your feeder is a quarter-mile from the truck. The Moultrie All-in-One II lets you adjust feed times and duration from the free Moultrie app at up to 300 feet, and pairing it with an Edge 3 camera extends that control beyond the property. That is a real convenience for a feeder you don't want to disturb.

The kit programs four feed events a day and spreads corn in a full circle with its broadcast spin plate. The Quick-Lock adapter attaches to flat-bottom drums, buckets, and custom builds, which makes it more flexible than a timer that only fits one factory box. We also like the slide-out battery tray: it runs on four AA batteries for standard use or eight for longer runtime, and the tray makes swaps less of a chore.

The Bluetooth connection is the weak spot. It can take a few tries to pair, or drop before you finish a change, so the removable control panel is the fallback: program it in your hand, then snap it back into the housing. We think the kit is worth it for a remote feeder, but not for someone who wants a simple set-and-forget timer with no app involved.

Eight feed times used to be a premium feature; this Tomaki timer brings that schedule to a budget replacement. It works with 6V or 12V systems, programs eight events a day, and runs each one from 1 to 30 seconds. You can also choose low, medium, or high motor speed for each feed.

We like the compact 2.5 by 2.5 by 3.5 inch case and the bright screen; it is small enough to fit where a full kit won't, and the connectors are simple to match to an existing motor. The eight-event schedule is the real draw. You can set a light morning spin and a heavier evening feed without buying a more expensive controller, which is more control than we expect at this end of the range.

The low price comes with a trade-off, and that is why this one is a budget pick rather than a top pick. It makes the most sense as a spare, a budget build, or a feeder close to home. If you want eight feed times and can check the unit often, it is a lot of scheduling for the money.

The metal box is the first clue this is aimed at a permanent food plot rather than a weekend feeder. The Highwild 6V kit includes the digital timer, motor, metal spinner plate, drop funnel, protective housing, and mounting hardware, so it is a complete rebuild for a standard barrel. It also programs eight feed times a day, which is the most scheduling in this group.

We like the drop-down front hatch and the metal housing; they make the unit feel like it belongs on a lease rather than a temporary setup. The timer runs each feed from 1 to 30 seconds, and the 6V motor is matched to the kit. For a simple install, the included hardware saves a trip to the parts bin.

The reason it sits in the also-consider tier is the mixed reliability and value. The timer is the part that decides whether the kit earns its keep, and this one has a less consistent record than our top picks. If you want eight feed times and a metal housing, it is worth a look; if you want the best odds of trouble-free seasons, spend the attention on THE-Timer or the Wildgame kit instead.