The 7 Best Deer Feeders of 2026

There is no timer, no app, and no battery in the Banks Feedbank 300, and that is the point. It is a 300-pound gravity hopper that mounts on a single 4x4 post, with feed ports at 42 inches and a large cover that lifts for filling.

We choose it for year-round supplemental feeding because the design removes the two things that fail most often on automatic feeders: the timer and the battery. The polyethylene body is thick and weatherproof, the single post is meant to stay out of the way of antler growth, and the adjustable ports let you dial back waste. The cover is a genuine convenience when you are filling a 300-pound hopper from a truck bed.

The trade-off is installation: the 8-foot 4x4 is not included, and you need a level spot plus enough help to set it three feet into the ground before the feeder goes on. We like the 42-inch port height because it puts feed at a natural level for deer and makes the whole unit easier to inspect. The single-post footprint also leaves more ground open around the feeder than a tripod.

The Wildgame Quick-Set 225 is built around a simple job: put corn in the air, set a timer, and get out of the woods. The assembly is quoted at about 15 to 20 minutes, and the 225-pound hopper gives you a useful buffer between refills. The 30-foot feed radius is the practical part—it spreads corn beyond a tight pile instead of dumping it in one spot.

The digital timer handles up to four feed times a day, with throws of 5, 10, 15, or 20 seconds. That is not the fine control of an app-driven feeder, but it is enough for a straightforward morning-and-evening pattern. The galvanized steel spinner plate and coated legs are the right materials for a simple tripod, and the whole package is light enough to move before you fill it.

We recommend it for a straightforward timed setup where you do not need a phone app or a 250-pound hopper. The four daily feed times are more than enough for most hunting patterns, and the simple timer is easy to program before you haul it out. The 5-second minimum is worth planning around, because a short throw is still a real pile of corn.

At 6.5 pounds empty, the Moultrie Gravity Tripod 50 is the feeder we grab when we want to set something up quickly and not think about batteries. It is the least expensive feeder here, and it holds 50 pounds of corn, protein pellets, or rice bran. The dual feed ports have rain shields and weep holes, and the whole thing straps to a tree or post with the included strap.

We like it for small plots, backyards, and anyone who wants to test a new feeding area without committing to a tripod. The 50-pound capacity is a single bag of corn, so it is not a set-and-forget feeder for a big herd; plan to refill it more often. The rain shields and weep holes help, but the ports are still the place to check after a hard rain—wet corn sours quickly.

It is not the feeder for a 300-pound corn budget, but it is an easy way to keep a small area active. The 50-pound hopper is also a good match for rice bran and protein, which are easier to manage in smaller batches. The 15.5-inch square footprint is small enough to tuck into a fence line.

The Wildgame Quick-Set 50 Bucket is the feeder we hang when we want to move with the deer instead of committing to a permanent stand. It is a 50-pound pail with a hanger, a PCell timer, and a 30-foot feed radius. The setup is quoted at about five minutes, and the pail shape makes it easy to carry into a new spot without a tripod or a post.

The timer is deliberately basic: one or two feed times a day, with corn or protein pellets. That suits a portable feeder you might hang for a few weeks and then move. It throws feed hard enough to cover a useful circle, and the test button lets you check the pattern before you walk away. We recommend it for someone who wants timed feeding on a small property, not for a hunter who needs a precise weekly schedule.

The 50-pound capacity is the main limit: it is a supplemental feeder, not a replacement for a 250-pound hopper. We like it for a travel route or a new property where you want to test activity without building a permanent stand. The pail is small enough to hang from a limb or a post, and the camo finish disappears into the timber.

The American Hunter 30-Gallon Nesting Hopper is a gravity feeder built around three 8-inch feed tubes, a 30-gallon hopper, and a twist-lock gravity system. There is no timer to program, which makes it the simplest kind of feeder to live with: fill it, set it level, and let the feed flow.

The three tubes are the reason to choose it over a single-port gravity feeder. They spread feed to multiple stations, and the 3/4-inch raised lip and hooded overhang are meant to cut waste and keep rain off the feed. Assembly is straightforward, and the hopper holds a useful amount without turning into a 300-pound installation.

We see it as a good fit for a small property or a supplemental feeding site where several deer should be able to eat at once. The 30-gallon hopper is the practical middle ground between a 50-pound bag feeder and a 250-pound tripod, and the three tubes keep several deer from crowding one spout. At 24 pounds empty, it is light enough for one person to move before the feed goes in.

The Boss Buck 350 is a 350-pound gravity feeder with a protein head and three feed tubes, and it is aimed at hunters who measure feed in bags, not handfuls. The hopper is HDPE with UV protection, the feed ports are 4-inch I.D. with a 1-inch overhang, and the head is set at a 10-degree angle to move feed toward the tubes.

The internal cone and three-way sleeve are the details that make the capacity useful. They are meant to distribute feed evenly and let you adjust the flow, so a full hopper does not dump in one place. The double-walled hatch lid is oversized to let the hopper breathe and reduce condensation, which matters when you are storing hundreds of pounds of protein. The round legs and galvanized hardware are built to be assembled once and left out.

This is a lot of feeder for a small plot. It takes a full load of feed to make the capacity worthwhile, and the footprint is not something you move on a whim. We like it for a supplemental protein site where the deer herd is large and the feeder can stay put. The 350-pound hopper is the reason to buy it; it is also the reason to plan the site before you fill it.

We reserve the Boss Buck 350 for high-volume protein feeding where the capacity and three tubes justify the footprint. It is not the easiest feeder to move or the cheapest way to start, but it is a serious piece of equipment for a property that needs it. The one-year limited warranty is worth noting for a feeder that asks you to commit to this much capacity.